新闻中心
抗震支架装置进程中有哪些留意事项
发布者：admin 时间：2019-02-19 10:26:00
抗震支架装置进程中有哪些留意事项、
What precautions should be taken in the process of anti-seismic bracket installation?
1、留意装置进程中应预留一定的地位
1. Pay attention to reserving a certain position in the process of installation.
由于温差的变化会招致抗震支架的管道资料的冷膨胀反响，因而会抗震支架发生一定的位移，因而在装置时应预留一定的地位。而在特殊管道中设置抗震支架时应能掌握间隔，抗震支架制造商特别强调在拐角处必需设置一个架子，彼此之间的间隔比间隔之间的设计要求应该添加一个抗震支架。
Because the change of temperature difference will cause the cold expansion response of pipeline data of seismic bracket, the displacement of seismic bracket will occur, so a certain position should be reserved in the installation. When installing anti-seismic brackets in special pipelines, the spacing should be mastered. The manufacturers of anti-seismic brackets emphasize that a bracket must be installed at the corner. The design requirements of the spacing ratio between the brackets should be added.
2、留意装置进程中的比例设计必需有严厉的计算
2. Pay attention to rigorous calculation of proportion design in the process of installation
抗震支架厂家在装置时强调，特别是风管承荷载系数需求运用有关规则的公式依照实践状况计算，由于一切装置设计必需十分迷信严谨，不能有任何武断。同时还有水管和金属管相关系数的选择和计算，抗震支架模型和设计必需停止检验和校核，必需确认满足要求才干运用。
When installing the anti-seismic bracket, the manufacturer emphasizes that, in particular, the load-bearing coefficient of air duct should be calculated according to the formula of relevant rules according to the actual situation, because all the device design must be superstitious and rigorous, and there can be no arbitrary. At the same time, the selection and calculation of the correlation coefficients of water and metal pipes are also included. The model and design of the anti-seismic bracket must stop checking and checking, and it is necessary to confirm that the application can meet the requirements.
